您好,欢迎进入深圳市羽杰科技有限公司官网!
183-0000-2010

联系我们

深圳市羽杰科技有限公司
联系人:王生
电话:183-0000-2010
地址:深圳市龙岗区平湖华南城M20栋 在线咨询

为什么蒸汽清洗是清洗铸件最好的方法

发布日期:2019-10-12 浏览次数:3

6d568c3aa4d14f5bec1f65bdca6bd443.jpg

由于各种原因,蒸汽脱脂被广泛认为是金属铸件的首选清洁方法:

For various reasons, steam degreasing is widely regarded as the preferred cleaning method for metal castings.

有效:蒸汽脱脂在去除油,油脂和污染物方面非常有效 - 使零件一尘不染,干燥并准备密封。

Effective: Steam degreasing is very effective in removing oil, grease and contaminants - keeping parts spotless, dry and ready for sealing.

对环境负责:蒸汽脱脂溶剂一次又一次地使用,因此在操作过程中几乎没有化学物质释放到环境中。它适用于低冲击溶剂,并且非常节能。

Responsibility for the environment: Steam degreasing solvents are used over and over again, so almost no chemicals are released into the environment during operation. It is suitable for low impact solvents and very energy-saving.

具有成本效益:溶剂和能源的有效利用 - 以及程序的速度和简单性 - 有助于保持运营和人工成本。

Cost-effectiveness: Effective use of solvents and energy - as well as the speed and simplicity of procedures - helps to maintain operational and labor costs.

节省空间:由于蒸汽脱脂不需要单独的腔室进行清洁和干燥,因此设备在车间占用的空间很小。

Space saving: Because steam degreasing does not require a separate chamber for cleaning and drying, the equipment occupies very little space in the workshop.

简单:蒸汽脱脂工艺简单,只需极少的人工和培训

Simple: Steam degreasing process is simple, requiring very little manual work and training.

本文标题:为什么蒸汽清洗是清洗铸件最好的方法 原文链接地址:http://www.fangxiuoil.com/show.asp?id=81

你觉得这篇文章怎么样?

0 0
标签:全部
网友评论

管理员

该内容暂无评论

中国网友
183-0000-2010