您好,欢迎进入深圳市羽杰科技有限公司官网!
183-0000-2010

联系我们

深圳市羽杰科技有限公司
联系人:王生
电话:183-0000-2010
地址:深圳市龙岗区平湖华南城M20栋 在线咨询

水溶性切削液有十大优点

发布日期:2019-10-12 浏览次数:2

切削液发臭解决方法.jpg

一:优异的防锈性能。(锈蚀时间三个月)。工件在加工的过程中,防锈是可以帮助我们提高工件的品质,一方面减少工件氧化变锈,另一方面也是对加工机械设备的一种保护。而且水溶性切削液的防锈性能也比较长,减少我们的成本。

First: Excellent rust resistance. (Corrosion lasts for three months). In the process of workpiece processing, anti-rust can help us to improve the quality of workpiece. On the one hand, it can reduce the oxidative rust of workpiece, on the other hand, it is also a kind of protection for processing machinery and equipment. Moreover, the anti-rust performance of water-soluble cutting fluid is relatively long, which reduces our cost.

二:良好的可见性,透明度高具有良好的可视性,特别适用于数控机床等现代加工设备、加工中心。

Second: Good visibility, high transparency and good visibility, especially suitable for modern processing equipment such as CNC machine tools, processing centers.

三:环保配方:无氯、三三嗪、二胺、芳香、亚硝酸钠等有害成分,对人体无刺激性,对操作者友好。

3: Environmental protection formula: no chlorine, triazine, diamine, aromatic, sodium nitrite and other harmful ingredients, no irritation to human body, friendly to operators.

四:切削液PH值稳定:产品选用进口添加剂,抗菌性很长,在中央系统或单油箱使用寿命(一年以上无腐败变质)

Fourth: The PH value of cutting fluid is stable: the product uses imported additives, which have a long antimicrobial activity and a long service life in the central system or single tank (no corruption or deterioration for more than one year).

五:低泡防泡:切削液出泡也是很多朋友都很头疼的问题,而水溶性切削液可以帮助我们减少工作中的出泡量,减少对其性能发挥的影响。性能优良,可用于金属加工用水溶性切削液软硬水的系统要求和高空气释放操作条件。

Fifth: Low foam and anti-foaming: The foaming of cutting fluid is also a headache for many friends, and water-soluble cutting fluid can help us reduce the amount of foaming in our work and reduce the impact on its performance. Excellent performance, can be used for metal processing water-soluble cutting fluid soft and hard water system requirements and high air release operating conditions.

六:润滑度高切削液体系中添加了特殊的表面活性剂。润滑性能高于同类产品,降低了刀具成本,提高了表面加工精度,可代替切削油使用,为操作者创造良好的环境。

Sixth: Special surfactants are added to the high lubricity cutting fluid system. Lubrication performance is higher than that of similar products, which reduces the cost of cutting tools and improves the surface processing accuracy. It can replace cutting oil and create a good environment for operators.

七:沉槽排油配方具有良好的排屑能力,提高切屑能力和切屑的沉降,保持系统的清洁和容易清除油污染物。

Seventh: The sink oil discharge formula has good chip removal ability, improves chip removal ability and chip sedimentation, keeps the system clean and easy to remove oil pollutants.

八:良好的冷却性和清洗能力:保持机床和工件的整洁,减少粘性物质。

Eighth: Good cooling and cleaning ability: keep machine tools and workpieces clean, reduce viscous substances.

九:高浓水稀释20-30倍,可正常使用。

9. High concentration water is diluted 20-30 times and can be used normally.

十:价格:切削液从进料、生产、物流,有良好的成本控制,尽量为客户创造更多的利润腾空间。

Ten: Price: Cutting fluid from feeding, production, logistics, has good cost control, as far as possible to create more profit space for customers.

本文标题:水溶性切削液有十大优点 原文链接地址:http://www.fangxiuoil.com/show.asp?id=75

你觉得这篇文章怎么样?

0 0
标签:全部
网友评论

管理员

该内容暂无评论

中国网友
183-0000-2010