您好,欢迎进入深圳市羽杰科技有限公司官网!
183-0000-2010

联系我们

深圳市羽杰科技有限公司
联系人:王生
电话:183-0000-2010
地址:深圳市龙岗区平湖华南城M20栋 在线咨询

铜抗氧化剂的使用流程

发布日期:2019-10-12 浏览次数:2

铜抗氧化剂的使用流程

Application process of copper antioxidant

     铜本身十分容易氧化变色的易蚀金属,未经过抗氧化处理过的铜十分容易氧化变色生锈严重影响铜件的外观、品质以及应用性能。铜抗氧化处理是铜金属表面友好保护的必要处理环节处理之铜材表面处理中非常重要的一个环节,利用铜抗氧化技术可以使铜产品光亮如新,表面金光闪闪,而不会很快氧化变色、发黑、生铜绿等腐蚀现象。

     Copper itself is very easy to oxidize and discolor the corrosive metal. Copper without antioxidant treatment is very easy to oxidize, discolor and rust, which seriously affects the appearance, quality and application performance of copper parts. Copper antioxidant treatment is a very important step in the surface treatment of copper materials, which is a necessary link for the friendly protection of copper metal surface. Copper antioxidant technology can make copper products bright and shiny, but not oxidative discoloration, blackening, green and other corrosion phenomena.

铜防止变色可以使用以下药剂:铜抗氧化剂,铜防锈剂,铜钝化剂,铜保护剂等

The following chemicals can be used to prevent copper discoloration: copper antioxidant, copper rust inhibitor, copper passivator, copper protective agent, etc.

Picture keywords

紫铜产品防氧化处理效果

Anti-oxidation Treatment Effect of Copper Products

铜材产品在经过冲压、切削、锻压等加工之后,存放一段时间如一个星期、一天、半天有的甚至1小时铜材表面就开始出现氧化变色甚至发黑的现象。要解决这一问题的最佳方法就是及时进行铜材保护处理

Copper products after stamping, cutting, forging and other processing, storage for a period of time such as a week, a day, half a day or even an hour of copper surface began to appear oxidation discoloration or even blackening phenomenon. The best way to solve this problem is to protect copper in time.

铜产品如何进行防锈抗氧化?

How to prevent rust and oxidation of copper products?

第一:除油除锈

First: Degreasing and Rust Removal

将加工好的铜件进行除油处理,清除铜件表面残留的冲压油、拉伸油、切削油等等(如果铜件已经有轻微氧化需进行除锈再进行除油清洗)

The processed copper parts are degreased to remove the residual stamping oil, stretching oil, cutting oil and so on (if the copper parts have been slightly oxidized, rust removal and oil removal cleaning are needed)

铜抗氧化处理,将彻底除油后的铜件放入铜抗氧化剂YJ-5088中进行浸泡,一般浸泡时间1-5分钟左右;将经过铜抗氧化剂YJ-5088浸泡的铜件进行清水/纯水漂洗处理洗掉铜表面残留的铜抗氧化剂残留,再进行烘干处理即可。

Copper antioxidant treatment, the copper parts after oil removal will be soaked in copper antioxidant YJ-5088 for about 1-5 minutes. Copper parts soaked by copper antioxidant YJ-5088 will be rinsed with clean water/pure water to remove the copper antioxidant residues on the copper surface, and then dried.

Picture keywords

黄铜产品品抗氧化处理对比

Contrast of Antioxidant Treatment of Brass Products

铜材经过抗氧化处理后,表面会形成一层无色透明但致密的保护膜可以有效的防止铜件继续被空气中的氧气等氧化腐蚀性介质所氧化与腐蚀,可以长久的保持铜原有光泽效果,而且几乎不改变铜材原有的所有性质

After antioxidant treatment, a colorless, transparent and compact protective film will be formed on the surface of copper, which can effectively prevent copper from being oxidized and corroded by oxidative corrosive media such as oxygen in the air. It can maintain the original luster effect of copper for a long time, and hardly change all the original properties of copper.

本文标题:铜抗氧化剂的使用流程 原文链接地址:http://www.fangxiuoil.com/show.asp?id=60

你觉得这篇文章怎么样?

0 0
标签:全部
网友评论

管理员

该内容暂无评论

中国网友
183-0000-2010