您好,欢迎进入深圳市羽杰科技有限公司官网!
183-0000-2010

联系我们

深圳市羽杰科技有限公司
联系人:王生
电话:183-0000-2010
地址:深圳市龙岗区平湖华南城M20栋 在线咨询

新闻中心

影响工业产品清洗的六大因素

发布日期:2019-01-10 浏览次数:8

一:被清洗的工件材质:Material of workpiece to be cleaned:

钝化剂防锈剂.gif铝合金清洗剂.jpg

1. 被清洗工件的材质(铝、铜、铁、锌合金等); Material of cleaned workpiece (aluminum, copper, iron, zinc alloy, etc.);


2. 工件外表污垢的类型(油、蜡、粉尘等) Type of dirt on the surface of workpiece (oil, wax, dust, etc.)


3. 工件构造能否复杂,有无缝隙、盲孔; Whether the workpiece structure is complex, whether there are gaps and blind holes;


4. 能否有外表涂层容易刮花、易零落 Whether there is external coating easy to scratch and fall


5. 能否容易生锈 Is it easy to rust


6、工件能否是组合材质,如合金上有塑料材质镶嵌等; Whether the workpiece can be a composite material, such as plastic inlay on the alloy;


7、 关于化学品有无特别央求(如禁用化学品,环保型央求,酸碱性等);Whether there are special demands for chemicals (such as banned chemicals, environmental protection demands, acid-base, etc.);


二:清洗设备类型type of cleaning equipment

timg.jpgf2a1793a99fab2464bc4ff3a63cc5eb4.jpg

1. 手工用布擦拭Wipe by hand with cloth


2. 简易框装浸泡手工哆嗦清洗 Simple frame soaking and manual shivering cleaning

3. 简易投入式超声波单槽清洗机. Simple input type ultrasonic single tank cleaner

4. 简易投入式超声波多槽清洗机. Simple input type ultrasonic multi tank cleaner

5. 机械自动化高压喷淋水性清洗机. Mechanical automatic high-pressure spray water-based cleaning machine

6. 手工操作的带冷凝安装的多槽型超声波清洗机Manually operated multi groove ultrasonic cleaner with condensation installation

7. 手工操作的多槽水性超声波清洗机. Manually operated multi tank water-based ultrasonic cleaning machine

8. 密闭型机械自动化水性超声波清洗机. Closed mechanical automatic water-based ultrasonic cleaning machine

9. 密闭型自动化冷凝安装的溶剂型超声波清洗机. Closed type automatic condensation installation solvent ultrasonic cleaning machine

10.规范的全自动封锁式碳氢清洗机. Standard fully automatic block type hydrocarbon cleaning machine


三:环境现场及工艺条件 environmental site and process conditions

羽杰科技环保清洗剂.jpg羽杰科技切削液清洗剂防锈剂钝化剂发黑剂.jpg

        现场的环境能否有良好通风设备及工艺添加决议了应采用何种清洗剂。若在密闭环境下必需选用低气息清洗剂。最典型的清洗环境包括:

         Whether the site environment has good ventilation equipment and process addition determines which cleaning agent should be used. If it is necessary to select low breath cleaning agent in closed environment. The most typical cleaning environment includes:


1. 简易工棚内,四面自然通风 In the simple work shed, four sides are naturally ventilated


2. 规范工业厂房内,通风较差. Standardize the industrial workshop, with poor ventilation


3. 规范工业厂房内,通风良好. Standardize the industrial workshop and ensure good ventilation


4、单槽清洗、多槽清洗. Single tank cleaning and multi tank cleaning


5、能否借助外力中止清洗(如超声波、高压、震动、放射、PIG管冲洗等). Can external forces be used to stop cleaning (such as ultrasonic, high pressure, vibration, radiation, pig pipe flushing, etc.)


6.能否加温、清洗时间多长. Whether it can be heated and how long the cleaning time is


7、无尘车间、有无纯水安装等. Dust free workshop, with or without pure water installation, etc


8.关于化学品有无特别央求. Is there any special request for chemicals


四:干净度央求及后续的加工央求* cleanliness requirements and subsequent processing requirements

羽杰科技环保清洗剂羽杰科技环保清洗剂切削液.png

1、工件外表有无残留,暗斑脏污、腐蚀痕迹等。. Whether there is any residue, dark spot, dirt or corrosion trace on the surface of the workpiece.


2、能否有热风烘干或其它单调安装,. Can there be hot air drying or other monotonous installation,


3、央求多久完好挥发或完好单调. How long is it required to be completely volatile or completely monotonous,


4、清洗的效率央求抵达多高,单位时间产能, The efficiency of cleaning requires how high the capacity per unit time is,


5、央求清洗后防锈、防变色多久,能否还用防锈剂单独来长期防锈. Ask how long the rust and discoloration are prevented after cleaning, and whether the rust inhibitor can be used alone for long-term rust prevention


6、对废液处置有无特别央求或者回收需求. Is there any special demand or recycling demand for waste liquid disposal


7、 能否有电镀、发黑、阳极氧化、喷漆,PVD镀膜、真空加膜处置等外表处置工序. Whether there are surface treatment processes such as electroplating, blackening, anodizing, painting, PVD coating and vacuum coating.


8、其他未提及的特殊干净度央求. Other special cleanliness requirements not mentioned



五:清洗剂的选择* selection of cleaning agent

羽杰科技_环保清洗剂_防锈剂_金属脱漆剂.png羽杰科技铝合金金属清洗剂.png

1.水基型的、溶剂型的和微乳型的. Water based, solvent based and microemulsion based

2. 可燃的,不可燃的. Combustible, nonflammable

3. 气味小的,气味大的. Small breath, big breath

4. 酸性、碱性和中性. Acid, alkaline and neutral

5. 可回收应用,不可回收应用. Recyclable application, non recyclable application

6. 兑水运用、原液运用. Water mixing and original solution application

7、有泡、低泡、无泡. Bubble, low bubble and no bubble

六:清洗方式* cleaning method

环保清洗剂除蜡水使用.jpg

1. 人工擦洗. Manual scrubbing

2. 浸泡清洗. Immersion cleaning

3. 超声波清洗. Ultrasonic cleaning

4. 喷淋清洗. Spray cleaning

5. 高压一次放射清洗. High pressure primary radiation cleaning

6. 真空超声清洗(标准碳氢设备). Vacuum ultrasonic cleaning (Specification for hydrocarbon equipment)

7、其他客户自选的特殊清洗方式。. Special cleaning methods selected by other customers.

本文标题:影响工业产品清洗的六大因素 原文链接地址:http://www.fangxiuoil.com/html/news/9.html

你觉得这篇文章怎么样?

0 0
网友评论

管理员

该内容暂无评论

广东省惠州市网友
183-0000-2010