您好,欢迎进入深圳市羽杰科技有限公司官网!
183-0000-2010

联系我们

深圳市羽杰科技有限公司
联系人:王生
电话:183-0000-2010
地址:深圳市龙岗区平湖华南城M20栋 在线咨询

环保切削液

  • 镁合金切削液_镁铝合金切削液_切削液厂家
  • 镁合金切削液_镁铝合金切削液_切削液厂家
  • 镁合金切削液_镁铝合金切削液_切削液厂家
  • 镁合金切削液_镁铝合金切削液_切削液厂家
  • 镁合金切削液_镁铝合金切削液_切削液厂家

镁合金切削液_镁铝合金切削液_切削液厂家

羽杰科技镁合金切削液具有优异的防锈防腐性能;不含硫氯,是一种高效、环保、经济、无毒害的切削液。
咨询热线:183-0000-2010

产品介绍

羽杰科技镁合金切削液介绍

Introduction of Yujie Technological Magnesium Alloy Cutting Fluid


u=2943408815,435700540&fm=15&gp=0.jpg


YJ-1311镁合金切削液采用自研发高极压润滑剂和优质复合添加剂精制而成,具有下列特点:

YJ-1311 magnesium alloy cutting fluid is refined with self-developed high extreme pressure lubricant and high-quality composite additives. It has the following characteristics:

◇ 适用于镁合金和镁铝合金材料的加工的磨削,切削;

It is suitable for grinding and cutting magnesium alloys and mg Al alloy materials.

◇ 提供优异的表面光亮度,延长刀具寿命;

Provide excellent surface brightness, prolong tool life;

u=821996999,2165380597&fm=26&gp=0.jpg

◇ 使用经济,良好的乳液稳定,使用寿命长;

Economical use, good emulsion stability, long service life;

◇ 可有效缓解由于加工时镁离子的大量进入造成油水分离现象的产生;

It can effectively alleviate the oil-water separation phenomenon caused by the large amount of magnesium ions in the processing.

◇ 减少氢气生成,降低火险隐患;

Reduce hydrogen generation and fire hazard;

◇ 优异的防锈防腐性能;

Excellent anti-rust and anti-corrosion performance;

◇ 良好的清洗性确保加工时机床保持清洁;

Good cleanliness ensures that the machine is kept clean when processing.

◇ 不含硫氯,是一种高效、环保、经济、无毒害的切削液。

No sulfur and chlorine, it is an efficient, environmentally friendly, economical and non-toxic cutting fluid.


u=1873263649,1687037074&fm=26&gp=0.jpg


羽杰科技镁合金切削液调配使用说明

Instructions on Allocation and Use of Yujie Magnesium Alloy Cutting Fluid

◇ 推荐使用量:磨削:3~5%;普通加工:3~8%;

Recommended usage: grinding: 3-5%; general processing: 3-8%;

◇ 切削液与水混合后使用 (将浓缩液加入水中稀释);

Cutting fluid is mixed with water and used (diluted by adding concentrated liquid into water);

◇ 尽量使用去纯水来稀释,有助于延长工作液寿命。

Diluting with depure water as far as possible is helpful to prolong the service life of working fluid.


镁合金切削液使用指导

Guidance for the Use of Magnesium Alloy Cutting Fluids

◇ 使用本品之前将机台及加工液槽/池清洗干净并杀菌再加入调配好的加工液;

Before using this product, clean the machine and the processing tank/pool, sterilize and add the prepared processing fluid.

◇ 严格控制槽液浓度,利于延长整槽加工液的使用寿命;

Strict control of tank liquid concentration is conducive to prolonging the service life of whole tank processing fluid.


u=4184391507,2204984927&fm=26&gp=0.jpg


◇ 若加工液槽/池中出现浮油应及时清除,有利于抑制细菌繁殖;

If oil slick occurs in the processing tank/tank, it should be removed in time, which is conducive to inhibiting bacterial reproduction.

◇ 未经允许不得添加/混合其它产品以免引起切削液污染腐蚀机台和工件。

Adding/mixing other products without permission is not allowed to cause cutting fluid contamination and corrosion of machine tools and workpieces.


镁合金切削液包装与存储

Packaging and Storage of Magnesium Alloy Cutting Fluid

采用200升铁桶包装。储存温度为 5~40℃,室内阴凉通风处存储。

It is packed in 200 liters drum. Storage temperature is 5 ~ 40 C, stored in a cool and ventilated room.

本文标题:镁合金切削液_镁铝合金切削液_切削液厂家 原文链接地址:http://www.fangxiuoil.com/show.asp?id=52

网友评论

管理员

该内容暂无评论

中国网友
183-0000-2010